Audio Analouge Maestro CD Player Reviewed

Audio-Analouge-Maestro-CD-Player-Reviewed.gifNo conceit here: Audio Analogue calls the Maestro a ‘Digital Audio Processor’ 

because they feel that it’s more than a mere CD player. This machine falls under the ‘no-compromise’ heading, and lifting the lid shows you why; you’ll think you were peering into a power amp. Occupying the front third of the unit, to the left of the transport, are two massive toroidal transformers, one each for the analogue and digital sections, with nine regulators ‘(to) guarantee a perfect supply to every part of the Digital Audio Processor’s complex circuits.’

These toroids plus metalwork you’d expect of, say, PS Audio mains filters, contribute to a confidence-inspiring weight of 44lbs. The chassis is made from 3mm-thick sheet steel, for isolation from both mechanical and electromagnetic interference, and the aluminium fascia is 20mm thick. The very instant you lift this chunky 445x360x135mm (WDH) monster out of the carton, you know you’re playing with something VERY serious. Actually, not instant – you’ll struggle with it.

Additional Resources

  • Read
    more source component reviews from
  • Discuss
    source components at
  • Explore source components at

Despite jam-packed innards, the Maestro is a clutter-free zone, with the remote handling all of the minor functions. The fascia contains only a display and tray flanked by vertical rows of four buttons for the basic transport commands, plus standby and ‘mode’. The display, in addition to track and time data, indicates if the Maestro is being used with as a one-box CD player, with an external digital source selected via the aforementioned mode button, or if its transport is feeding an external DAC.

Maestro’s ‘loop’ circuit allows the signal from the CD transport to be digitally processed before being sent to the D/A converter, so digital equalizers, delay units or proprietary devices used for digital correction of the loudspeakers can be inserted into the Maestro. The transport and control board have been optimised with the use of an extremely rigid support structure to improve the mechanical performance, while adding shielding from RF.

Minimalism marks the back panel, too: main on/off button, IEC mains socket, a choice of unbalanced (gold plated RCA) or balanced (XLR) analogue outputs and a coaxial digital input and digital output – no TOSlink, no AT&T. I used the Maestro in balanced mode into the McIntosh C2200 pre-amp and in single-ended mode into the Musical Fidelity Tri-Vista 300, with Sonus Faber Cremona Auditors.

Read more about the Maestro on Page 2.


With a noise floor of -140dB, THD of <0.001% @ 1kHz, and jitter
rejection stated as 0.00005%, you expect something quiet and precise,
but that's not the whole story: I've said above this CD player is
physically reminiscent of an amp. It behaves like one, too, imparting to
the sound sensations I normally associate with wattage- or
current-related matters. Music through the Audio Analogue Maestro has a robustness, a
sense of force, a feeling of, well, power which I cannot ascribe to
other players.

While it’s smooth and open, possessing silky treble and plenty of
air, down below it’s a bruiser, delivering potent, tight, extended bass
and VAST dynamic scope. It wasn’t speaker-breaker like the low-end
transients of Macca’s ‘Live & Let Die’ which impressed: the lead
vocal 58 seconds into the Persuasions’ ‘Don’t Let Me Down ‘ – sheer
voice power ON ITS OWN – told me that the Maestro is one of the most
confident, coherent, controlled, and, yes, powerful-sounding CD-players
I’ve been lucky to enjoy.

Maestro constructs a vast soundstage with cavernous 3D
characteristics; I was dazzled by the way it exploited the magnificent
dispersion of the Amators. Image height was enough to pass the Chesky
test, and the Maestro throughout attributed to the music a sense of
weight which you MUST hear. One burst of Kodo through it is all it

But there’s a sting: I tried Maestro with superior transports and
found that, yet again, a Philips transport proved less than worthy of
the rest of the unit. Which leads me to the most bizarre suggestion I’ve
made in ages: buy a Maestro and use it as a DAC with a decent transport
from, say, Sony. Even at 1600, it’s a D/A converter to reckon with, to
savour, to pull more from your CDs than just about anything else below
Theta or dCS levels. Just think of the transport section as an
unnecessary, non-terminal extra. Like a wart.

Il Cuore
Maestro provides ‘true’ 96kHz/24-bit D/A conversion via two Analog
Devices AD1855 DACs used in parallel. According to AA, ‘This means that
even the normal CD signal is effectively converted at high resolution.
Responsible for this great improvement in D/A conversion is the Crystal
Semiconductors CS8420 high performance sample rate converter, so far
seen only in professional studio equipment.’ The CS 8420 turns the
digital signal into a high resolution digital signal for the D/A
converters, with lowered jitter thanks to the high-precision crystal
oscillator used as a reference.

AA explains, ‘This conversion process implies the creation of true
24-bit samples for this reason: two DACs receiving the high resolution
signal will always work at their best, providing the analogue stage with
the best possible signal. The benefits of the sample rate converter
will be heard in the improvement to other performance parameters, such
as jitter and distortion.’

The analogue stage, too, is special, using polypropylene and Os-Con
capacitors, high precision (0.1%) low noise resistors and high linearity
FETs. It was designed for wide open-loop bandwidth and low overall
feedback, ‘to give perfect behaviour with transients as well as
crystal-clear detail resolution.’ KK

Additional Resources

  • Read
    more source component reviews from
  • Discuss
    source components at
  • Explore source components at